TI E2E Community
Analog solutions: When Small Turns to Minute
The rapid increase of processors power requirements in portable consumer applications has forced additional companion chips to the PMICs. The ever-increasing feature-set that tablets and handsets must support, like 3D cameras, haptics, DLP® projectors and other functions, place increasing pressure on how designers optimize the total available space on the board. The PCB size limitation challenges designers to solve this design puzzle through innovative design methods and smaller packages.
TI recently introduced its latest boost converter in the highly integrated MicroSiP™ system-in-package technology, integrating IC and passive components in a single device. The TPS81256 is the newest addition to the MicroSiP family. The device keeps a low profile by embedding the converter IC in the PCB in a Picostar™ package with the passives mounted on top. Footprint can be as small as 7.5mm2.
This modular approach eases designers’ works by providing a fully integrated solution for DC/DC conversion. To the designer, this module could act as a black box with only the input voltage, output voltage and the output current as required parameters. There is no need for selection of passives, which reduces the layout efforts when dealing with high frequency switching regulators. Check “Design Summary” for details
TPS81256, a 3W boost converter provides a drop-in solution for applications like USB-OTG (Figure 1) or Class-D audio amplifiers (Figure 2), among others.
The 4-MHz, 600-mA TPS81256 module supports a 5-V output. With a supply current of 43 µA during light load operation, the device can achieve power efficiency greater than 90% over a wide load range. The device features excellent line/load regulation as well as great load transient response, as we can see in figure 3. Click here to see a dynamic representation of the load transient response vs. the input voltage.
For more information on the 3-W boost converter integrated solution refer to TPS81256.
How do you optimize board space in your designs?
Index of all Power House posts.
Power House is a part of the TI Blogs and covers power management ICs. Check back every day to the Power House blog on E2E for topics on designing and managing power supplies for a range of end equipment applications.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.