We've got a situation in our current project where we're using the SN74LC827a to implement a mux to switch between two eight-bit BT-656 video sources, and it seems that we've painted ourselves into a corner and the parts just aren't fast enough for our needs.
As near as I can tell from the data sheets, this part was intended for 10Mhz signals, and we need to get 27Mhz data through it. Does the 29287 get us what we need?
Can someone recommend a pin-compatible replacement that will work for signals >50 Mhz? I can be reached at jcr@mac.com.
Thanks,
-jcr
Hi John
The LVC827A should run up to about 100Mhz.
Are you actually seeing problems?
Hi, Chris.
Yes, we are having trouble with the LC827A, (oops, put the wrong part number in the heading for this thread).
Looking at the board in my hand, the topside markings on the part are:
"LC827A"
"48K"
"A8T6"
If the LVC version will handle 100Mhz, that should take care of our situation. Thanks!
John
The Top side mark for the LVC827A is "LC827A"
But this part should not have any problems at 27Mhz. Have you scoped the output?
My firmware engineer has scoped the output, and the waveform he's seeing is nearly a sawtooth wave, trying to pass a 27Mhz signal through it. Looking it up on the BOM, the exact part number we specified is SN74LVC827ADBR. I'm wondering if there's a way to confirm what speed grade we actually do have on these boards, and whether a supplier may have given us the wrong parts.
What do the "48K" and "A8T6" markings mean?
I will check the markings and see if they are good. One mark is a date code and one is assembly site. Is there a way we could see the input vs the output plot and possibly this section of the schematic?
My email is c-cockrill@ti.com.
ALL CONTENT AND MATERIALS ON THIS SITE ARE PROVIDED "AS IS". TI AND ITS RESPECTIVE SUPPLIERS MAKE NO REPRESENTATIONS ABOUT THE SUITABILITY OF THESE MATERIALS FOR ANY PURPOSE AND DISCLAIM ALL WARRANTIES AND CONDITIONS WITH REGARD TO THESE MATERIALS, INCLUDING BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHT. NO LICENSE, EITHER EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, IS GRANTED BY TI. USE OF THE INFORMATION ON THIS SITE MAY REQUIRE A LICENSE FROM A THIRD PARTY, OR A LICENSE FROM TI.
Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI and its suppliers reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.