Hi,
I am trying to capture 720p video on DM6437 EVM in YCbCr 16-bit mode, with external sync.
My video source generates 720p video in BT-1120 format, with external sync signals (HSync, VSync, FD). And it has 74.25MHz pixel-clock. I have configured DM6437's VPFE in YCbCr 16-bit mode, VD/HD Enable (input), DataSz=16bit, Pack8=0
Attached is the snapshot of captured video. I can see the Y-data is captured correctly, but C-data is not coming properly. Any suessions on how to solve this issue? I probed the CCD8-15 lines, and didn't see any issue in data.
Do I need to enable "Turbo mode"? Is there any register/pin I need to set for Turbo mode?
Thanks in advance,
Mitul Chokshi (www.einfochips.com)
ALL CONTENT AND MATERIALS ON THIS SITE ARE PROVIDED "AS IS". TI AND ITS RESPECTIVE SUPPLIERS MAKE NO REPRESENTATIONS ABOUT THE SUITABILITY OF THESE MATERIALS FOR ANY PURPOSE AND DISCLAIM ALL WARRANTIES AND CONDITIONS WITH REGARD TO THESE MATERIALS, INCLUDING BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHT. NO LICENSE, EITHER EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, IS GRANTED BY TI. USE OF THE INFORMATION ON THIS SITE MAY REQUIRE A LICENSE FROM A THIRD PARTY, OR A LICENSE FROM TI.
Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI and its suppliers reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.