Hi,
Could you please tell us the calculation procedure of "Table 2. PLIMIT Typical Operation" which is mentioned on page 16 of data sheet as below?
Although we calculated them simply, we could not obtain same results.
Best Regards,
Kato
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Could you please tell us the calculation procedure of "Table 2. PLIMIT Typical Operation" which is mentioned on page 16 of data sheet as below?
Although we calculated them simply, we could not obtain same results.
Best Regards,
Kato
Hi Kato-san,
I will send you the calculation xls vie email.
reg,
Paul.
Hi Paul-san,
Thank you for your quick reply.
I will confirm the xls file which you sent to me in detail.
Best Regards,
Kato
Dear Paul san
Could you send me the calculation xls, too.
Actually, my customer encountered the same problem.
Best regards,
Shinichi
Hi Shinichi-san,
Please see the following post.
http://e2e.ti.com/support/amplifiers/audio_amplifiers/f/6/p/368208/1301335
Best Regards,
Kato
Dear Kato san
Thank you for your quick reply.
I can get the xls file.
I'll send the customer.
I appreciate your great help.
Best regards,
Shinichi
Dear Kato san and Paul san
Thank you for your reply.
The customer was confirmed the xls file.
He said the result is not correspond between datasheet and xls.
Could you please teach the following questions.
Also could you see attached xls file.
Q1 Where is Rfet ? (I think Rfet is a Rdson of internal FET. Is it correct?)
Q2 Where is Rckt ? (I think Rckt is a Resintance of inductance and PCB. Is it correct?)
Q3 Why are two values of red frame different ?
Q4 P\ease teach me the conditions that values of exponential fit's table (green frame) are changed.
Q5 Are they related with PVCC value (PVCC=12V or 24V) ?
Best regards,
Shinichi
Dear Specialists
Does anyone reply?
My customer wants to know the difference the datasheet and excel file.
Could you please advise me following questions ?
Also could you see attached xls file.
Q1 Where is Rfet ? (I think Rfet is a Rdson of internal FET. Is it correct?)
Q2 Where is Rckt ? (I think Rckt is a Resintance of inductance and PCB. Is it correct?)
Q3 Why are two values of red frame different ?
Q4 P\ease teach me the conditions that values of exponential fit's table (green frame) are changed.
Q5 Are they related with PVCC value (PVCC=12V or 24V) ?
Best regards,
Shinichi
Hi Shinichi-san,
A1. Yes, it's correct.
A2. Yes, it's correct.
I recommend that you evaluate it in a laboratory and please inquire to TI local office FAE regarding the remaining questions.
Best Regards,
Kato
Dear Paul
Thank you for your reply.
I'll confirm the document.
I appreciate your great help.
Best regards,
Shinichi