Purepath-CMBEVM + TAS5754MDCAEVM

Gates Tan

Other Parts Discussed in Thread: TAS5754MDCAEVM

bought the Purepath-CMBEVM + TAS5754MDCAEVM that are constructed as 2.1 using two TAS5754M .

Managed to download Purepath Console 1.16 and the software only have TAS5760 that is 2.0 . According to the TAS5754M EVM Manual it said I should download PurePath Console 2 but I could do find on TI Website . I have also downloaded the Purepath Studio for Home and Portable Audio .

Can someone help me to make it work or where to download the software . Thanks !

Gates Tan

over 8 years ago

0 Diego Melendez over 8 years ago

TI__Guru 57800 points

Hi Gates,

Effectively, TAS5754MDCAEVM requires PurePath Console 2. You can request the software in http://www.ti.com/tool/purepathconsole, after a few hours you will receive a confirmation email.

Regards,

-Diego Meléndez López
Audio Applications Engineer

0 Gates Tan over 8 years ago in reply to Diego Melendez

Prodigy 30 points

Hi Diego ,

Thanks for the reply . I have requested but I miss the download date and has expired . I have just request again hope can get by tomorrow .

I am new to TI Purepath Console or Suite , is there any training information or user manual that you can direct me?

Best,
Gates

0 Diego Melendez over 8 years ago in reply to Gates Tan

TI__Guru 57800 points

Hi Gates,

You shall be able to download the software from http://www.ti.com/mysecuresoftware once the access is granted. About the information you are looking for, you may take a look to the TAS5754/56 EVM Users guide and Using the TAS5754/56M HybridFlow Processor Application note.

Regards,

-Diego Meléndez López
Audio Applications Engineer

Audio

Audio forum

Purepath-CMBEVM + TAS5754MDCAEVM