Single end input to Differential end output convert

kent gu

Other Parts Discussed in Thread: DRV134, DRV135

Hi,

Now I want to realize the function, covert single end input signal to differential end output signal. The signal speed is <1M HZ, and voltage is 0/5V, need 3 channels.

My question is that, want to look for a economic chipset to realize the function.

Best Regards,

Kent

over 7 years ago

0 Ivan Salazar over 7 years ago

TI__Guru* 95285 points

Hi Kent,

What kind of signal is it? Is this an analog audio signal? The differential signal will be connected directly to a speaker?
You could take a look at DRV134/DRV135.

Best regards,
-Ivan Salazar
Texas Instruments

0 kent gu over 7 years ago in reply to Ivan Salazar

Intellectual 685 points

Hi Ivan,

May I post the question in the wrong place, should be Audio Amplifier. My application is transfer single signal into differentiaonl for motor driver, which is encoder signal. DR134 still works? or any cheaper soltuion?

Best Regards,

Kent

0 Ivan Salazar over 7 years ago in reply to kent gu

TI__Guru* 95285 points

Hi Kent,

If the signal is similar to an audio signal, DRV134 should do it.
I think you can ask in the General Purpose Amplifier forum if they have another device suggestion that could fit in your requirements.

Best regards,
-Ivan Salazar
Texas Instruments

Audio

Audio forum

Single end input to Differential end output convert