This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS2560 Clock Setting(tuning) guide question

Other Parts Discussed in Thread: TAS2560, TAS2555

Hi~ I'm Morgan.

One of our customer is designing TAS2560 and asking how to set I2S clock.

They had got  Purepath Console - TAS2560 (as below) but still don't know which function can set clock they want.

And they showed me TAS2555 is possible to change. 

They said that I2S spec(clock) of AP was fixed and needed PLL config parameter for below clocks.

- MCLK : 9.6Mhz

- BCLK : 1.536Mhz

- WSCLK: 48khz

Please share I2S setting guide of TAS2560 and guide us how to set clock...

Thanks in advance 

  • Hi Morgan,

    TAS2560 app don't have a dump option like TAS2555 to configure the input clock, frequency and sampling rate.
    You can configure TAS2560 directly into its registers through the register map option. This is mostly related to ASI (Audio Serial Interface) registers (0x14 through 0x1B), PLL regsiters (0x0F through 0x12) and also Sampling Rate (0x36).

    Best regards,
    -Ivan Salazar
    Texas Instruments