This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5782M: Package Body Dimension

Part Number: TAS5782M

Hi,

I am a little confused that there is mentioned "Body dimensions do not include mold flash or protrusion not to exceed 0.15." on page 126 of TAS5782M data sheet.
So, could you please refer to the following questions and give me your advice about the package body dimension ?

1106.TAS5782M_Package_Body_Dimension.pdf

Best regards,
Kato

  • Hi Kato-san,

    The error range of TAS5782 mold flash or protrusion dimension is not exceed 0.15 mm, so it means that the 0.15 mm is the maximal size of possible mold flash or protrusion, not always exists.
    For Q1, each side mold flash or protrusion is not exceed 0.15 mm.
    For Q2, the total typical body dimension is 12.50 mm with possible 0.15 mm + 0.15 mm mold flash or protrusion (Maximum).

    Thanks,
    Matthew
  • Hi Matthew-san,

    Thank you for your prompt reply.
    I understood.

    Best regards,
    Kato