TPA3110D2: crossover circuits with TPA3110D2

Toan Do76

Part Number: TPA3110D2
Other Parts Discussed in Thread: TPA3136D2

Hi All,

I want use 2 channel for speaker. one left channel for Woofer and Right channel for Tweeter other. What I can use TPA3110D2 for this desgin ?

You can schematics or values of component, don't you ?

Any feedback on this would be appreciated.

Thank You,

over 6 years ago

0 Jeff Kohnle over 6 years ago

TI__Expert 6985 points

Hello! Shawn can help you with further questions, but what loads are you trying to drive? This device was designed to primarily enable BTL stereo applications or PBTL mono applications. Also, have you looked at our next generation 10-W, Lower Total System Cost, Inductor-Less Stereo Class-D Amplifier with Ultra-Low EMI, the TPA3136D2? Thanks, Jeff

0 Shawn Zheng over 6 years ago

TI__Mastermind 24835 points

Hi Toan,

You can use TPA3110D2 in that way (the left channel for Woofer and the Right channel for Tweeter). Please refer to our TPA3110D2 EVM design. http://www.ti.com/lit/ug/slou263b/slou263b.pdf

TPA3136D2 has ultra low EMI and fixed 26dB gain. Please also find more info about TPA3136D2 in http://www.ti.com/lit/ds/symlink/tpa3136d2.pdf http://www.ti.com/lit/ug/slou444a/slou444a.pdf

Best regards,

Shawn Zheng

Audio

Audio forum

TPA3110D2: crossover circuits with TPA3110D2