• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 28 subscribers
  • Views 591 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPA6130A2: Asking for the TPA6130 pop performance

SHH
Mastermind 30251 points
Part Number: TPA6130A2

Hi Team,
due to some limitaion on the headphone amp pop performance on customer PCB. We would like to promote TPA6130.
Can TPA6130 meet the following spec from IC side for customer request?
customer spec:Headphone out level 300mV/32Ω, pop noise<-60dB


Thanks,
SHH

  • 0
    TI__Guru* 95175 points

    Hi SHH,

    TPA6130A is able to output 300mV into 32Ω loads. Pop noise performance of TPA6130A2 should be sufficient to stay under -60dB. Please see the attached pop measurement.

    Best regards,
    -Ivan Salazar
    Audio Applications Engineer - Low Power Audio & Actuators