TAS2557: TAS2557 C3/D3 pin

allan chiang

Part Number: TAS2557

TAS2557 C3 / D3 pin, Spec is to write the NC, but the EVM line inside is C3: INP / C4: INM, please help confirm the correct connection

over 6 years ago

0 José Luis over 6 years ago

TI__Mastermind 20085 points

Hi Allan,

The right one is the datasheet. These pins should be left floating, so you do not route any signal or supply to or through these pins.

Best Regards
José Luis Figueroa
Audio Applications Engineer

Audio

Audio forum

TAS2557: TAS2557 C3/D3 pin