Part Number: TAS5421-Q1
one of my AA is evaluating the TAS5421-Q1 with the TAS5421EVM. In the set up he is using the PCM5102EVM to generate the signal.
Is the following connection allowable ?
PCM5102EVM -> TAS5421EVM
J1-signal (RCA output OUT_R) -> J2-2 (INP)
J1-shield (shiled of RCA) -> J2-1 (INM)
GND of PCM5102EVM -> J2-6 (GND)
In reply to Adam Sidelsky:
Tuan is on vacation, so I will help you.
The connections described are correct for single ended input. If you have noise issues, the shield of the input connection (IN-) could be connected to the GND.
Regards,Gregg ScottSenior Application EngineerMid Power Audio Amplifiers
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.