TAS5766M: Running TAS5766M in PBTL 1.1 mode?

user5378407

Part Number: TAS5766M
Other Parts Discussed in Thread: TAS5825M, TAS5782M

Hi Guys,

I have been looking at the spec. and various other forum posts, but have been unable to find an answer yet.

How do I run the TAS5766M in 1.1 PBTL mode? There are several mentions of an internal process flow to support this, but nothing for the PPC3 GUI as of yet.
Any progress in this area?

Regards Tue

over 5 years ago

0 Andy Liu (BMS) over 5 years ago

TI__Guru 52115 points

What you you mean by 1.1 PBTL mode? Do you mean you want to use two TAS5766M devices and each of them works in PBTL mode?

We have only designed a stereo(2.0) SmartAmp flow for TAS5766M. If you are designing a 1.1 system using just one TAS5766M device, TAS5766M cannot fit. I would suggest you take a look at TAS5782M and TAS5825M. They both have dedicated 1.1 flows.

Andy

0 user5378407 over 5 years ago in reply to Andy Liu (BMS)

Prodigy 120 points

Thanks. The TAS5782M seems a good fit.

Audio

Audio forum

TAS5766M: Running TAS5766M in PBTL 1.1 mode?