Part Number: INA3221
My customer have design INA3221 in their board, i now just find R/C filter value have some problem(customer use 10ohm & 10 uF).
because i am not familiar this part. may you have other suggestion to us? and if some channel we have no use. may we direct flotation? (or like C3317 connect way?)
What problems are you seeing? I recommend looking over datasheet section 8.4.3 titled “Filtering and Input Considerations” to see if it helps you with your design. The capacitor you are using is outside of the recommended spec, which is to use values from 0.1 µF to 1.0 µF, as shown below.
Also, here is a link to a thread that discusses how to deal with unused channel inputs.
Mitch M, TI Sensing Products Applications Support
If this answered your question, please click below.
Getting Started with Current Sensing Video Training Series
TI makes no warranties and assumes no liability for applications assistance or customer product design. You are fully responsible for all design decisions and engineering with regard to your products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning your designs.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.