Hi Team,
Could you please help review INA220 schematic?
voltage is 12V.
Imax is 140A.
Thanks,
SHH
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
Could you please help review INA220 schematic?
voltage is 12V.
Imax is 140A.
Thanks,
SHH
SHH, can you please upload or e-mail me a higher resolution image?
1) I2C Lines A0 and A1 should be connected to either valid configuration, as per table below, without resistors.
2) The configuration with multiple shunt resistors is not recommended by TI due to the variation of voltages in different circuit locations due to PCB copper thickness and layout. Given the very low ohmic value of the current-sensing resistor, any additional high-current carrying
impedance causes significant measurement errors - I suggest the number of shunt resistors to be minimised or reduced to one.