Part Number: LMC6492
My application need a battery management charger IC.Take a look the design layout,
1. A micro USB connector from smart phone to PC or power adapter will be use.2. From this USB connector VBUS will be supply power to my external system through the battery charging IC.3. This IC will manage the 5V , 2A power from adapter but, in quick charging mode, 9V, 2A power should be block by the management IC.
If you look on the diagram you would see, the current path is divided in 2 ways!In QC mode, the adapter has 9v/1.67A, after connected the Galaxy note 5 we saw 1.23A is operating.Right at the moment, we have faced a problem that is the charger ic side current will be 0.44A to 0.30A( depending on the supply current from adapter or over voltage and current protection).The battery we gonna use has 3.7V 2200mAh in actual spec capacity. (sorry for my previous information)It will take long time to charge the battery
I think we need to boost up the current level more, I am not sure what would be its value.
Can I use Howland Current Pump in this purpose? www.ti.com/.../snoa474a.pdf
If you have any idea about this solution, let me know please.
Regards,Ronald MichallickLinear Applications
TI assumes no liability for applications assistance or customer product design. Customer is fully responsible for all design decisions and engineering with regard to its products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning Customer's design. If Customer desires engineering services, the Customer should rely on its retained employees and consultants and/or procure engineering services from a licensed professional engineer (LPE).
In reply to Ron Michallick:
In reply to MD MUBDIUL HASAN:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.