TI E2E Community
/etc... Amplifiers & Other Linear
/etc... Amplifiers & Other Linear Forum
5v to 15v
I want to bust 5V analog signal to 15V and should have 200mA DRIVING CAPABILITY.
Please help me
Sorry but it is not clear what you are trying to do.
Do you need to amplify your input analog signal? What is the voltage range of the input signal? What is the voltage range of the output signal? What power supplies do you have available?
On behalf of sanjeev I would like to mention the details of input signal and output signal,
The input signal is analog signal 1.8Vpp 1KHz,
and the intention is to amplify this signal to 15.0V with 200mA driving capability.
I though of using OPA547, but because of BOM cost we would like to go with LM358 with the npn transistor at output.
As far as supply is concerned I have 15.0V on the board.
Thanks and regards
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.