This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: LM393
Thank you in advance for any assistance you can provide.
I'm a mechanical engineer but have a fairly general understanding of electronics and have designed several circuits that appear to work okay. Having said that... my plan is to design a small circuit using TI's LM393 comparator in a simple proximity detection circuit. The detector outputs a DC range between 0V and 5V as range increases (from 0cm to 100cm). I want to limit detection to about 60cm (roughly 2 feet) and ignore anything greater than that distance. So... my thought is to use the LM393 with a reference voltage of 3 volts on the - input and let the + input range from 0 to 5 volts. If I understand the comparator correctly, the output (with a pull-up resistor) should be low until the + input reaches and exceeds 3 volts at which time it would go high. Am I correct in this assumption? Also, I'm a bit confused about what Vcc needs to be if the + input can go to 5 volts. Does it need to be 7 volts or greater? (Vcc plus 2 volts)? Or, can Vcc also be 5 volts?
Thank you again for your help. My apologies if the questions are really basic.
Low Power Amplifiers and Comparators (LPAC) Applications
In reply to Paul Grohe:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.