This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I am currently working on a LC Colpitts oscillator circuit and I am using LMV116 op amp for the oscillator.
The following is the schematics for the oscillator:
The inductance is 2.9uH, In order to oscillate at the frequency of 800KHz or a little higher, the capacitor should be nF range.
I placed the 1nF cap (C27 and C28), then the circuit started oscillating without the inductor attached to it. My guess is the LMV116 cannot drive
the cap with 1nF. So I am wondering what the maximum load capacitance LMV116 can drive.
If LMV116 cant drive nF range capacitors, are there any op amps will be more suitable for this application or can drive large cap?
The LMV116 is an enhanced slew rate version of the LMH6645. The high speed LMH devices are very sensitive to output capacitance (normally they drive back-terminated loads) and normally start oscillating with direct capacitive loads as low as 50pF.
You have a direct capacitive load path to ground through C29 and C28 - this is probably what is causing U9 to go unstable.
Try placing a 50 to 100 ohm resistor in series with the output (pin 1). This is usually enough to squelch the oscillations.
Low Power Amplifiers and Comparators (LPAC) Applications
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Paul Grohe:
Thanks for the help.
I just tested it out again placing a resistor in series with the load capacitors and it squelch the oscillations. But it also squelch the LC oscillations that I want.
Just try to find a way that it can only squelch the oscillations causing by the big capacitive load and leave the LC oscillations.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.