This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

LM2904: Op AmpDesign

Part Number: LM2904

I am having no luck finding an Engineering Design Utility referenced in Applicatio Report SLOA097 (page 2, section1).

Is this utility still available? The application report does not give a file location or number.

I found this page, but the links all appear to be dead.....

http://www.ti.com/analog/docs/enggresdetail.tsp?familyId=0&genContentId=861 

Any help is appreciated

tom

  • Hi Tom,

    Thanks for pointing that out, I noticed the article doesn't give a link to the file location as well.

    While I look further into this with the rest of my team, allow me to refer you to the WEBENCH tool also useful for op amp design.

    www.ti.com/.../amplifiers.html

    Thanks for your patience.

    Regards

    -Mamadou
  • In reply to Mamadou Diallo:

    Hi Tom,

    It seems like that tool is no longer available on ti.com. It has been replaced with the WEBENCH tool that I previously suggested and in addition, we also have our TI Precision Labs Videos Series and the Analog Engineer's Circuit Cookbooks that you may find helpful both you can find below:

    www.ti.com/.../circuit-cookbook.html
    training.ti.com/ti-precision-labs-op-amps

    Please let me know if you have further questions.

    Regards,

    -Mamadou
  • In reply to Mamadou Diallo:

    Hi Tom,

    Just to clarify, that tool no longer exist on ti.com.

    You may find the graphical tool below helpful as well for common calculations related to op amps circuit designs.

    www.ti.com/.../analog-engineer-calc

    Additionally, if you can tell more about the design that you're working on, I can suggest helpful tools and tips.

    Regards,

    -Mamadou

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.