This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Support Path: /Reference designs/Help finding technical applications collateral/
Sir I have traced an old circuit and designed my own PCB
for generating a sine wave.
Here is the circuit. But despite having the exact same design the sine wave output is distorted.Please find attached the snapshots from the CRO.
Please suggest any changes that will help me improve my design.
There are potentially many reasons why you may be getting the waveform you are seeing. I recommend watching our TI Precision Lab videos to help find the root cause of your issue. It might also help to simulate your circuit in TINA TI to see if you can replicate the issue in simulation.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.