TI E2E Community
High Speed Amplifiers
High Speed Amplifiers Forum
Peak Detector using THS4631
8551.PeakDetector.pptI am designing the peak detector circuit using THS4631. I have some problem. Before designing the circuit, I verified on the circuit on Tina and it shows working. But, I implemented on my board and can not have top peak voltage of signal. Here is my board and Tina schematic attached. As schematic shown, the first buffer is to extract signal with X5, which is no issue here. The second is the problem stage. I can not have negative or positive peak value. If you need more information, we can discuss with you on phone or through email.
Your help is really appreciated
Responce via email.
Ranji C. Bhola
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.