This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

THS6182: IADJ pin

Part Number: THS6182

Hi,

Could you let me know how to use IADJ pin, please?
It isn't described in datasheet.

Best regards,
Shimizu

  • Hi Shimizu-san,

    The Iadj pin should be connected to ground through a resistor. In the THS6182 datasheet, this resistor is 0-ohms in-order to operate the device in maximum bias current setting. The Bias pins 1 & 2 could then be used for changing bias conditions of the device once the bias current is set using the Iadj pin. I would not recommend to leave the Iadj pin open because the supply current will drop substantially and result in improper working of the device.

    Best Regards,
    Rohit