THS7002EVM: Need the power connectors for THS7002EVM

Hi Mickey,

these are banana jacks.

Kai

Hi Kai,

I believe this request actually originated from my end. I'm posting it below:

"I've recently purchased a THS7002EVM board. To my understanding a number of 3 power supplies would be ideal - one for 5V and 2 supplying a user-defined voltage. I was thinking of this model www.tme.eu/.../ for buying all 3, since they have variable output voltage. The problem I'm seeing is that the evaluation board requires banana-style connectors as input, while this type of power supply - although offering various output connector types - doesn't have one such banana connector. Can you let me know if any of the output connector for the aforementioned power supply would work with the eval board ? Alternatively, can you let me know of an converter that could be used ? Or even a particular power supply you recommend ?"

The type of output connectors from the particular power supply mentioned above are:
3,5/1,35
5,5/1,5
5,5/2,1
5,5/2,5
Jack 2,5mm
Jack 3,5mm

I'm not sure if any of the connectors would directly fit the J1-J4 connectors. A convertor from any of the above to banana-style would solve the issue, however I've been searching for a while but came out empty.


Regards,
Mihai

Hi Mihai,

in the user guide of eval board you will find a part number of the banana jacks: (NEWARK) 35F865

Hope that helps...

Kai

Hi Kai,

35F865 is the part number of the jack as it's installed in eval board. What I wanted to avoid was cutting the wires of the power supply and use a regular banana plug on the stripped wire, since that makes impossible using it with the output connectors anymore.


Regards,
Mihai