TI E2E Community
Precision Amplifiers Forum
I am using TLE2072 for implementing filters. I want my circuit to be battery powered, a 3.7V battery powered, to be precise. My question is, how will I make my TLE 2072 work @ 3.7V.For grounding, should I use virtual ground circuits? My present circuit works on +5V, -5V and it does need a ground.
Any kind of suggestion might be helpful. Thanks in advanced.
The minimum operating voltage for the TLE2072 is 4.5V and it is not well-suited to single supply operation at low voltage. I believe it would be better to select an op amp that is better suited to 3.7V operation. The OPA2320 might be one possible choice. TI has a wide selection of rail-to-rail op amps that would better suit your application.
You are correct, a voltage divider with buffer (virtual ground) circuit is probably the best way to create a mid-supply reference voltage.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.