TI E2E Community
Precision Amplifiers Forum
MPY634 Divider Connection
I need to use something to do analogue division, and the MPY634 seems ideal for this purpose. I've tried to simulate the schematic shown in the datasheet using the behavioural model posted somewhere on these forums, and I can't reproduce the proper division behaviour. Moreover, if I substitute (y1 = 0, y2 = vout) into the multiplier's transfer function I get this:
Which matches the output I'm getting from the SPICE simulation. However, I know that the SPICE model is based purely on the transfer function, hence I was wondering whether I would achieve the transfer function shown in the datasheet if I constructed the actual circuit.
Thank you for your help,Leon
The basic divider connection and transfer function shown in the MPY634 data sheet are correct.
PA - Linear Applications Engineering
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.