TLV274 common mode input range is Vdd - 1.35V as datasheet. TLV274 is RRO opamp. But we used it as RRIO opamp and did not experience any problem.
We used +-5V split suppy. I can measure excessive commom mode voltage on device pins. But everything seems working properly.
TLV2374 is pin compatible with TLV274 and it is RRIO but gets $0.30 extra cost. (totaly 5*$0.30) I can use TLV2374 but do I realy need to replace ?
Everything seems ok but I can not able to be sure. I can measure 4.87V and it is slightly higher than 5-1.35V.
Does anyone have an idea ?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.