• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 50 subscribers
  • Views 1693 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Can INA128P operate like single supply

Armando Ferreira
Expert 1925 points
Other Parts Discussed in Thread: INA128

Hi, 

I'm trying to build an electrocardiogram, But I'm using a INA128P double supply, and all my system should be work in 0-5V single supply, so how can put in the "ground" of INA128P 2.5V,  (half 5V). can you help me with a schema i dont know much about electronic.

  • 0
    TI__Genius 15410 points

    Yes, you can supply the INA128 with a single supply of 5V. The INA128 can be used with dual supplies of +/-2.25V to +/-18V or single supplies of +4.5V to +36V. With a single supply the V+ pin is connected to a voltage between +4.5V and +18V and V- pin is conntected to ground. When using single supplies be sure to stay within the common mode voltage range of the device, please see figures titled INPUT COMMON-MODE RANGE vs OUTPUT VOLTAGE in the INA128 datasheet for these limitations.

    Please visit this link for more information concerning ECG signal acquisition. It has a few links to some useful information.

    http://e2e.ti.com/support/amplifiers/precision_amplifiers/w/design_notes/2437.ecg-heart-signal-acquisition.aspx

    Hope this helps!

    -Tim Claycomb