Wireless on Jacinto 6 rev G3 ( dra 74xx)

Filip Verhaeghe

Prodigy 10 points

Hi,

I have Jacinto 6 EVM board with 10.1 LCD connected.

I did Android bring up using per-build images available from http://omappedia.org/wiki/6AL.1.1_Release_Notes.

How to enable wifi on this board? Do I have to buy additional expansion board like COM8Q ?

Any idea about using Ethernet on Android?

over 8 years ago

0 Sivaraj Kuppuraj over 8 years ago

TI__Mastermind 35645 points

Hi,

Moving your post to right forum to be better answered.

Thanks & regards,
Sivaraj K

0 Yanko Todorov-XID over 8 years ago

TI__Mastermind 29520 points

Hello Filip,

#Q: How to enable wifi on this board? Do I have to buy additional expansion board like COM8Q?

- For enabling WI-FI on J6 EVM board you must connect an expansion board to COM8 (P9) connector. You are right the expansion board, which you can use is COM8Q wifi module. Driver for this board is available at omapedia.org/.../6AK.1.2_Release_Notes

#Q: Any idea about using Ethernet on Android?

- About this question, you can read the wiki - processors.wiki.ti.com/.../Android_ADB_Setup

Take a look on similar thread for AK release - https://e2e.ti.com/support/omap/f/885/t/398291

Best regards,

Yanko

Automotive (Read-Only)

Automotive Forum (Read-Only)

Wireless on Jacinto 6 rev G3 ( dra 74xx)