Our customer has requirement for DSCC V62/09602 which lists the AM26LV32E as a generic option. However the TI device pinout is different than the DSCC. IS this a misprint or is the TI device NOT DSCC qualified ? Compare pins 1 and 2.,
DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990
V62/09602 - Device type Generic Circuit function -- 01 AM26LV32E-EP Low voltage high speed quadruple differe
Pin - Function
1 - 1A
2 - 1B TI -> http://www.ti.com/lit/ds/symlink/am26lv32e-ep.pdf
... AM26LV32EMDREP, ACTIVE, -55 to 125, V62/09602-01XE, 1.86 | 100u, SOIC(D) | 16, View, 2500 | LARGE T&R, >5k, 1k quantity lead time: In stock ...
1 - 1B
2 - 1A
Pin 1 should indeed be 1B (not 1A). The non-TI document is incorrect. There should be symmetry in the pin outs (left side vs. right side). I will let our HiRel department comment on DSCC qualification of the -EP device.
Regards,Ronald MichallickLinear Applications
TI assumes no liability for applications assistance or customer product design. Customer is fully responsible for all design decisions and engineering with regard to its products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning Customer's design. If Customer desires engineering services, the Customer should rely on its retained employees and consultants and/or procure engineering services from a licensed professional engineer (LPE).
Also ... when looking at the "Recommended Operating Conditions" -> http://www.ti.com/lit/ds/symlink/am26lv32e-ep.pdf>
Regarding voltage below , It should be Volts not mA, correct?
MIN NOM MAX UNIT
V IC Common-mode input voltage –7 7 mA
V ID Differential input voltage –7 7 mA
Rick, yes this should be V for both VIC and VID.
I will initiate the corrections.
The DSCC drawing is incorrect as Ron noted. It "should" be compliant to the DSCC dwg, but the pinout is in error. I will initiate these changes as well.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.