TI E2E Community
ADS1278-HT +5V Analog Supply Requirement
We will use ADS1278-HT in our design. Based on the data sheet of ADS1278-HT, the recommended Analog Supply is 4.75V to 5.25V. What will happen if the analog supply drops to 4.6V? Will this affect the operation of ADS1278-HT or just affect the noise performance of it?
Jimmy, it is very likely that device would only suffer performance loss. However, our test and characterization only includes the recommended operating conditions, so no warranties on operation.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.