• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 47 subscribers
  • Views 484 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE5801EVM TSW1250EVM

Vimal Parmar
Prodigy 50 points
Other Parts Discussed in Thread: AFE5801EVM, AFE5801

Hi,

I am working on AFE5801EVM with TSW1250EVM.
While capturing data continuously on TSW1250EVM GUI, I can save data from any one channel only at a time.
I am trying to capture data from total 4 channel simultaneously, but not able to do so. 
Can you please help me on this?

Thank you very much,
Vimal

  • 0
    TI__Mastermind 29220 points

    Hi,

    I am transferring to the Medical Forum, as that is the group that supports these products.

    I can say that our similar TSW1200 GUI did not allow for saving simultaneous data from multiple channels.  We did have an option to run Matlab code that had lower level control of the TSW1200 hardware to get multiple channels saved but i don't know of that ever being available for TSW1250.

    Your best bet may be to switch to the newer TSW1400 with the HSDCPro GUI that will allow for saving data from multiple channels simultaneously.

    Regards,

    Richard P.

  • 0
    TI__Expert 6320 points

    Vimal,


    No, this is not possible with the built-in FW for the TSW1250EVM.  The newer capture solution is the TSW1400EVM, which can capture all channels simultaneously.  http://www.ti.com/tool/tsw1400evm


    Thanks,

    Chuck Smyth

  • 0 in reply to Chuck Smyth
    Prodigy 50 points

    Chuck,

    Thanks a lot for your quick reply.

    Yes, I tried it before with TSW1400 EVM.  But, there was no AFE5801 ADC in HSDC Pro GUI in select ADC Tab.
    Can you please help me with this?

    If possible, can I have your e-mail address? My email address is vimalkumar.parmar@siemens.com.

    Thank you very much!

    Regards,
    Vimal