Hi,
I would like to power AFE4300 from Arudino, now i know it runs on up 3.6V, so i am planning to power it withouth mmb3 board.
Just wonder how i go about doing this.. and secondly i would like to intefaced with Ardunio over spi too..
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I would like to power AFE4300 from Arudino, now i know it runs on up 3.6V, so i am planning to power it withouth mmb3 board.
Just wonder how i go about doing this.. and secondly i would like to intefaced with Ardunio over spi too..
Malik,
We have received your post and hope to have a response back to you soon.
Malik,
We are not experts at using arduino, but there are many forum post about some other users who have done this. I would start by looking at our EVM and using that as a reference as you start your schematics. This will also help you get more familiar with the device.