OMAPL137-HT: OMAPL137DZKBT3 Internal Trace PCB Layout

EE_MT

Other Parts Discussed in Thread: OMAP-L137

What is the recommended internal trace width connecting to the OMPAPL137? Traces connect to inline resistors then to buffers.

Internal layer is 0.5oz copper.

Thanks.

over 7 years ago

0 Wade Vonbergen over 7 years ago

TI__Guru 62930 points

Matt,
I would like to understand what part you are using. In the part number it indicates the High Temp -HT version. Then another line shows the commercial version for part number.
With respect to the HT version, we have not defined trace widths for customer's boards that are exposed to extreme environments. Typically our customers have much better information and data regarding this.
If you are looking for commercial use, our catalog team may have some details to share.
Regards,
Wade

0 EE_MT over 7 years ago in reply to Wade Vonbergen

Intellectual 390 points

Wade,
The correct part number is the commercial version: OMAPL137DZKBT3

0 Wade Vonbergen over 7 years ago in reply to EE_MT

TI__Guru 62930 points

Matt, I am unable to edit the part number in the post.
I would suggest you re-post the question using only the commercial part number. This should place it in the correct forum.
Regards,
Wade

0 Wade Vonbergen over 7 years ago in reply to Wade Vonbergen

TI__Guru 62930 points

Matt, try using part number omap-l137.
Regards,
Wade

Space & High Reliability (Read Only)

Space & High Reliability Forum (Read Only)

OMAPL137-HT: OMAPL137DZKBT3 Internal Trace PCB Layout