This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

ADC32RF80: About calibration or correction

Part Number: ADC32RF80

Hello,

It seems ADC32RF80 don't do calibration while normal operation but interleave correction do. Is my understanding correct?

My question is whether ADC output code stopped while calibration or interleaving correction circuit works.

I think the answer would be no but please let me confirm.

Best regards,

Toshihiro Watanabe

  • Hi,

    The interleaving correction runs all the time (unless it's disabled). No other calibration is done during normal operation. So, there's no interruption to ADC's output.

    Regards,
    satish.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.