TI E2E Community
Motor Drivers Forum
TPS2811 does not work with +12V
I'm developping a Brushless Controller. Recently I had some trouble with my MOSFET Drivers. So I changed to the TPS2811P. The problem is now, that they don't want to work with more than 8.9V. With 8V they turn the MOSFETs on and off very well, but if I turn the voltage above 9V they just stop switching.
Does anyone know this problem and know what to do?
Unfortunately, I am not familiar with this part.
Have you considered using one of our integrated parts like the DRV8301 or DRV8312?
Motor Drive Application Manager
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.