This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV3204-Q1 setting

Dear all,

I would like to know words of caution when DRV3204-Q1 is set standby mode.

When I set DRV3204-Q1 to standby mode by EN=low, about 150uA was flowing at VB.

But data sheet say that consumption current is 50uA(TYP) / 100uA(MAX).

What make this difference?

And, about 0.6V floating was confirmed at FAULT-pin and CS-pin under standby mode.

Is there words of caution when DRV3204-Q1 is set standby mode?

Best regards,