what are the things that i should keep in mind while making PCB layout of bldc motor controller with TO-220 package mosftes??
Please tell me the minimum distance of the mosfets from the IC,minimum clearance of the traces,etc.....
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
what are the things that i should keep in mind while making PCB layout of bldc motor controller with TO-220 package mosftes??
Please tell me the minimum distance of the mosfets from the IC,minimum clearance of the traces,etc.....
Are the gate signals (GH_X and GL_X) are differential signals pairs??
Are they supposed to be near with each other on the pcb layout??
Hi Shashank,
The gate signals are not differential pairs, and do not need to be near each other.
what is the maximum allowable voltage at SH_X pins??? (NOT GIVEN IN THE DATASHEET)
I request you to give me the values not to refer me any section of the datasheet.