• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 439 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8800: DRV8800 Question

Kuo John
Expert 1075 points
Part Number: DRV8800

Hi Team,

I verification DRV880 operation and has some question need you help.

May I know DS show shorted to gnd function same to OCP ? since we OUT+ shorted to GND occur IC damage. (@ RSENSE 0.33 ohm)

  • 0
    TI__Guru** 114905 points
    Hi Kuo John,

    If the output is high and shorted to GND, this would be considered an overcurrent (OCP) event. The device should protect itself by disabling the outputs as described in section 9.3.10 of the datasheet.

    Would you provide a diagram of the test performed?
    What were the input states?
    How was OUT+ shorted to GND?
    What type of damage occurred?