This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Bobby Bradford:
In your explanation you specified that timer 3B is used for hardware timestamping. I need to know how Timer3B is configured for capturing the time stamp of reciept of Ethernet packet.
TimerConfigure(TIMER3_BASE, (TIMER_CFG_16_BIT_PAIR | TIMER_CFG_A_PERIODIC | TIMER_CFG_B_CAP_TIME)); TimerPrescaleSet(TIMER3_BASE, TIMER_BOTH, 0); TimerLoadSet(TIMER3_BASE, TIMER_BOTH, 0xFFFF); TimerControlEvent(TIMER3_BASE, TIMER_B, TIMER_EVENT_POS_EDGE);
In the above snippet of code, it shows How timer 3B is configured for Capture mode. But my doubt is how does this timer know to timestamp for ethernet recieve packet.
And also I am trying to modify the code for transmit time stamp using the other timers(Timer 2 or Timer 1 or Timer 0). I need know How to configure the timer for time stamping the transmit Ethernet packet.
Please help on this. Thanks in Advance.
Infant Jesuraj F
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.