CCS/TDA3: Run use case by CCS

gang chen76

Prodigy 155 points

Part Number: TDA3

Tool/software: Code Composer Studio

Hi,

I want to run usecase by CCS, my CCS version is 7.2.0, my platform is D3 engineering RVP.

Usecase can be run, I mean SBL in QSPI flash, APP file in SD, use Tera Term.

But when I try to use CCS, I followed "VisionSDK_UserGuide_TDA3X_RVP", step by step.

And always loop as the following:

over 6 years ago

0 Mariya Petkova over 6 years ago

TI__Expert 4885 points

Hi, gang chen76 ,

Expert has been notified about your problem.

Regards,
Mariya

0 Anand Kulkarni71405 over 6 years ago in reply to Mariya Petkova

TI__Expert 8920 points

Hi,

What are the cores included in the build and have you loaded the binaries of all the included cores?

regards,

Anand

0 gang chen76 over 6 years ago in reply to Anand Kulkarni71405

Prodigy 155 points

Hi Mariya,
Thank you for reply!

I have all cores built in binary, M4-0 M4-1 DSP0 DSP1 EVE.
And load sequence is M4-0 M4-1 DSP0 DSP1 EVE, run sequence is EVE M4-0 M4-1 DSP0 DSP1 .
You know, EVE is running just after load.

BR!

0 Piyali Goswami over 6 years ago in reply to gang chen76

TI__Mastermind 30235 points

Hi,

Before loading the code from CCS, can you please click on the "CPU reset" button in CCS. This is especially required for EVE. Also, I hope you have made sure the "TDA3xx_multicore_reset.gel" has been modified to have

#define VISION_SDK_CONFIG 1

Thanks and Regards,

Piyali

0 gang chen76 over 6 years ago in reply to Piyali Goswami

Prodigy 155 points

Dear Piyali:
Cool, I changed this define and it works now!
Thank you for your help!
BR!

Processors

Processors forum

CCS/TDA3: Run use case by CCS