CCS/TDA2EXEVM: 762f0v9

Karthick E63

Part Number: TDA2EXEVM

Tool/software: Code Composer Studio

Hi,

In My Board ,I have flashed an application that disables the JTAG. Now,I could not connect to the SoC. Is There an way (a method/programmer tool) to recover the SoC.

Thanks,

E.K

over 5 years ago

0 Rishabh Garg over 5 years ago

TI__Guru 55685 points

Hi Karthick,

You can change SYSBOOT to debug boot mode and then connect to the SoC using JTAG.

Regards,
Rishabh

0 Karthick E63 over 5 years ago in reply to Rishabh Garg

Prodigy 20 points

HI,

Can you tell me ,How I can do this change SYBOOT to DebugBoot.

Thanks,

E.Karthick

0 Rishabh Garg over 5 years ago in reply to Karthick E63

TI__Guru 55685 points

Hi,

SYSBOOT is a dip switch(SW4 on TDA2E17x17 EVM). You need to set the switch to 00000000 10000001.

Regards,
Rishabh

0 Rishabh Garg over 5 years ago in reply to Rishabh Garg

TI__Guru 55685 points

Hi,

We haven't heard back from you, I'm assuming you were able to resolve your issue.
If not, just post a reply below (or create a new thread if the thread has locked due to time-out).

Regards,
Rishabh

Processors

Processors forum

CCS/TDA2EXEVM: 762f0v9