• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 101 subscribers
  • Views 440 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA3: Implement the avm top view

JP Park95
Expert 1100 points

Part Number: TDA3

Hi,

We want to implement the AVM Top View as below.

 Device : TDA3x

SDK :Vision SDK 3.03

I have tried to  implement the Top View using ViewToWorld Mesh tool but I do not know how to implement the Top View as above picture.

Please give me the guide how to Implement the Top View using the camera 4.

Thanks

JP Park 

  • 0
    Prodigy 50 points
    Add a question.

    Please refer to the linked YouTube video
      I want to make the same 3D view between 0:10 and 0:18.

    LINK : www.youtube.com/watch
  • 0 in reply to LEE DG
    TI__Genius 12455 points

    Hi JP, Lee,

    Can you please help me with the following

    1. Frame resolution and frame rate of the cameras (and i presume 4 cameras are used)
    2. Display resolution and frame rate
    3. Kind of sensor (BAYER and bits/pixel or YUV bits / pixel)
    4. Any other algo's that would be required along with SRV
    5. Is it only top-view (2D) or full 3D views would be required

    This should be possible, there is no TDA3x imposed restrictions. I am not sure if TI demo SRV Algo can support this though.

    Regards, Sujith

  • 0 in reply to Sujith
    TI__Intellectual 1530 points
    This appears to be duplicate of another thread on the same topic. If so, please close this thread and respond to the original thread (I have also posted a reply there)

    Regards
    Shashank