TI E2E Community
Sitara Processors Forum
suggestion needed for nand flashes on AM37xx
We are using Two Nand flashes on AM37xx custom board!
One Nand flash for booting purpose (x-loader, u-boot.bin. uImage)
Second Nand flash for external storage purpose (trying to add UBIFS image which is not happeninig) ?
Please clear my above doubt on second nand flash?
Please check the chip select configurations.
Configuration for chip select 7 is done, we are able to access 2nd Nand flash.
Through u-boot command, we are able to do read/write images, those are happening correctly!
After adding, things, e.g: ubifs image!
Changed boot arguments according /mtd partition , then trying to mount file system , but not able to mount?,
In which OS you want to bring up your nand?
Please stick to one
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.