Hi,
I am new to Beagle bone. My beagle bone is booting up and I can login as root.
I trying to build SPI drivers spidev0.0, and spidev1.0
Please teach me how to build spidev0.0 and spidev1.0 in the kernel.
Regards,
Ramesh
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I am new to Beagle bone. My beagle bone is booting up and I can login as root.
I trying to build SPI drivers spidev0.0, and spidev1.0
Please teach me how to build spidev0.0 and spidev1.0 in the kernel.
Regards,
Ramesh
Hi,
Which Linux version are you using?
Please check this wiki: http://processors.wiki.ti.com/index.php/AM335x_McSPI_Driver's_Guide
This article may help you too: http://hipstercircuits.com/enable-spi-1-0-and-1-1-with-device-tre-overlays-on-beaglebone/