Require Reference PRU_ICSS design for ICE_AM3359

Varun Rajendran40

Prodigy 50 points

Other Parts Discussed in Thread: AM3359

Hi all,

I am doing project on ICE_AM3359, I want to know about the PRU.

I searched documents for PRU on ICE_AM3359, but I am getting document only with beaglebone board.

Can anyone help me to get reference design for PRU on ICE_AM3359 with the GEL file?

Regards,

Varun

over 8 years ago

0 Biser Gatchev-XID over 8 years ago

TI__Guru**** 393215 points

Hi,

What do you mean by "reference design for PRU"? ICE board schematics or PRU documentation? PRU is documented in section 4 of the AM335X TRM Rev. L, which can be downloaded from here: http://www.ti.com/lit/ug/spruh73l/spruh73l.pdf The ICE board design files are available here: http://processors.wiki.ti.com/index.php/AM335x_Industrial_Communications_Engine_Board_Design_Files

0 Varun Rajendran40 over 8 years ago in reply to Biser Gatchev-XID

Prodigy 50 points

Hi,

Thanks for the update.

Sorry, I mean examples(e.g: led toggling with required GEL file) for PRU in ICE_AM3359.

As it is available for beaglebone board.

Regards,

Varun

0 Biser Gatchev-XID over 8 years ago in reply to Varun Rajendran40

TI__Guru**** 393215 points

You have to download the Industrial SDK: www.ti.com/.../sysbiossdk-ind-sitara You will find links to additional information on the download pages.

0 Varun Rajendran40 over 8 years ago in reply to Biser Gatchev-XID

Prodigy 50 points

Hi,

Thanks for the update.
I require latest POWERLINK PRU MAC binaries for ICE_AM3359 board.

Regards,
Varun

0 Frank Walzer over 8 years ago in reply to Varun Rajendran40

TI__Mastermind 43121 points

Hi Varun,
there is currently no such product available publicly. For any POWERLINK solutions on Sitara you may however contact our third Party in Germany called Port GmbH.
Regards,

0 Varun Rajendran40 over 8 years ago in reply to Frank Walzer

Prodigy 50 points

HI,

Thanks for the update

Regards
Varun

0 Felickao Yang over 8 years ago in reply to Frank Walzer

Intellectual 650 points

Hello Frank,

I have contacted port GmbH, and they do not provide the POWERLINK PRU binaries for the AM335x. port will only provide the POWERLINK stack code and HAL (hardware abstraction layer) to the PRU. Can you please clarify this issue? Thanks.

0 Frank Walzer over 8 years ago in reply to Felickao Yang

TI__Mastermind 43121 points

Hi,

I can't influence a third party. So please discuss/raise the issue with your local TI contact.

Regards,

0 Felickao Yang over 8 years ago in reply to Frank Walzer

Intellectual 650 points

Hi Frank,

I apologize for any confusion. I am only interested in obtaining the PRU openMAC binaries and not the POWERLINK stack. Can you tell me who is supposed to provide the PRU openMAC binaries? How do I obtain the PRU binaries?

0 Frank Walzer over 8 years ago in reply to Felickao Yang

TI__Mastermind 43121 points

Hi,
yes, that package is not publicly available and you need to raise this with your local TI contact.

Regards,
Frank

0 Vincent BENOIT over 8 years ago in reply to Felickao Yang

Prodigy 10 points

Hi fyang,

I'll also interested with the openMAC sources code or binaries, do you find any solution with your TI contact ?

I'm surprised to must use a non free third party library to play with network interface from PRU while TI announced his support, in a white paper.

0 Felickao Yang over 8 years ago in reply to Vincent BENOIT

Intellectual 650 points

Hello Vincent,

I have contacted my local TI distributor/contact and should receive a response sometime this week. I will update this post when I get the response.

Processors

Processors forum

Require Reference PRU_ICSS design for ICE_AM3359