CCS/PROCESSOR-SDK-AM335X: SDK training

Henry Nguyen1

Tool/software: Code Composer Studio

Dear Staff,

I am new to PROCESSOR-SDK-AM335X. With other TI products like TivaWare or MSP340, I have no problem using TI Code Composure to open SDK projects,

But with AM335X, I just get lost. Is there any step by step for me to just setup all components, then use Code Composure to compose a hello.c , and test it on BeagleBone Black?

I appreciate all the help.

Thanks,

Henry Nguyen

over 7 years ago

0 Biser Gatchev-XID over 7 years ago

TI__Guru**** 393215 points

Which SDK are you asking about? There are 3 available.

0 Henry Nguyen1 over 7 years ago in reply to Biser Gatchev-XID

Intellectual 400 points

Hi Biser,

I like to try all three of them in order of preference: Linux, RTOS, and Linux-RT. All I need is step by step, how to setup the TI Code Composer application project hello.c based on the SDKs, compile, download, and run it on the BeagleBone Black.

Right now I have the "BeagleBone Black Wireless" board with the default Debian Linux. Let me know if you have any questions.

Thanks,

Henry Nguyen

0 Biser Gatchev-XID over 7 years ago in reply to Henry Nguyen1

TI__Guru**** 393215 points

For a start you can begin reading the documentation for each SDK. You will find the links to documentation on the download page for each package.

0 Henry Nguyen1 over 7 years ago in reply to Biser Gatchev-XID

Intellectual 400 points

OK, I read the SDK documents again.
Thanks,
Henry Nguyen

0 Biser Gatchev-XID over 7 years ago in reply to Henry Nguyen1

TI__Guru**** 393215 points

Check this too: e2e.ti.com/.../1096250

Processors

Processors forum

CCS/PROCESSOR-SDK-AM335X: SDK training