This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
The Ti AM5728 EVM camera module sometimes is detected:
/ # ls /dev/video*
/dev/video0 /dev/video1 /dev/video10
/ #
and sometimes not:
/ # ls /dev/video*
/dev/video0 /dev/video10
/ #
In fact we asked if it was a hardware or software problem. In one of this case what is the solution ?
Also I'm informing you that the items are new (about 5 days).
Best regards,
Hello Biser,
I tried with the latest one and i have always the same issue with the Ti AM5728 EVM camera module.
BR :)
Faiez
Hello Dwarakesh,
For this issue, i want to know the linux command to do that (dmesg).
Thank you,
BR :)
Faiez
Hello Dwarakesh,
EVM: Ti 5728 evm
Kernel: 4.4.41
The Ti AM5728 evm camera module is not detected with the latest kernel:
root@am57xx-evm:~# ls /dev/video*
/dev/video0 /dev/video10 /dev/video11
root@am57xx-evm:~#
I tried to do the "dmesg" command and i have this result. (The result is given by the attachment file .txt)
Thank you,
[ 0.457654] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vdd_3v3[0]' [ 0.457872] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-aic_dvdd[0]' [ 0.458107] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixedregulator-vtt[0]' - status (0) [ 0.458379] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixedregulator-mmcwl[0]' - status (0) [ 0.461383] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.461568] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.461725] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.461886] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.462150] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.462344] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.465309] palmas 0-0058: Irq flag is 0x00000008 [ 0.482004] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 0.563585] gpiochip_find_base: found new base at 504 [ 0.563683] gpiochip_add: registered GPIOs 504 to 511 on device: 48070000.i2c:tps659038@58:tps659038_gpio [ 0.564091] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.564579] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.565140] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 0.565343] media: Linux media interface: v0.10 [ 0.565394] Linux video capture interface: v2.00 [ 0.565432] pps_core: LinuxPPS API ver. 1 registered [ 0.565438] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.565464] PTP clock support registered [ 0.565506] EDAC MC: Ver: 3.0.0 [ 0.566249] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400 [ 0.566534] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400 [ 0.566822] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.567110] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.567459] Advanced Linux Sound Architecture Driver Initialized. [ 0.568271] clocksource: Switched to clocksource arch_sys_counter [ 0.579201] NET: Registered protocol family 2 [ 0.579690] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.579753] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.579878] TCP: Hash tables configured (established 8192 bind 8192) [ 0.579926] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.579957] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.580163] NET: Registered protocol family 1 [ 0.580431] RPC: Registered named UNIX socket transport module. [ 0.580441] RPC: Registered udp transport module. [ 0.580448] RPC: Registered tcp transport module. [ 0.580455] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.580469] PCI: CLS 0 bytes, default 64 [ 0.581413] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.583669] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.591279] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.591933] NFS: Registering the id_resolver key type [ 0.591959] Key type id_resolver registered [ 0.591967] Key type id_legacy registered [ 0.592029] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.593971] bounce: pool size: 64 pages [ 0.594126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.594142] io scheduler noop registered [ 0.594156] io scheduler deadline registered [ 0.594190] io scheduler cfq registered (default) [ 0.599172] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.602733] dra7-pcie 51000000.pcie_rc: GPIO lookup for consumer (null) [ 0.602746] dra7-pcie 51000000.pcie_rc: using device tree for GPIO lookup [ 0.602777] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp/axi@0/pcie_rc@51000000[0]' - status (0) [ 0.602890] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 0.602902] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 0.602934] IO 0x20003000..0x20012fff -> 0x00000000 [ 0.602954] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.632808] dra7-pcie 51000000.pcie_rc: link is not up [ 0.632974] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 0.632987] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.632997] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.633007] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.633041] pci 0000:00:00.0: [104c:8888] type 01 class 0x060400 [ 0.633084] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 0.633106] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 0.633173] pci 0000:00:00.0: supports D1 [ 0.633182] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.633406] PCI: bus0: Fast back to back transfers disabled [ 0.633523] PCI: bus1: Fast back to back transfers enabled [ 0.633607] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.633622] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.633635] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.633855] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.633868] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded [ 0.633987] aer 0000:00:00.0:pcie02: service driver aer loaded [ 0.635101] pwm-backlight backlight: GPIO lookup for consumer enable [ 0.635111] pwm-backlight backlight: using device tree for GPIO lookup [ 0.635121] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]' [ 0.635130] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]' [ 0.635138] pwm-backlight backlight: using lookup tables for GPIO lookup [ 0.635148] pwm-backlight backlight: lookup for GPIO enable failed [ 0.635180] backlight supply power not found, using dummy regulator [ 0.694554] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.697965] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 1.658847] console [ttyS2] enabled [ 1.663191] 48422000.serial: ttyS7 at MMIO 0x48422000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.673267] [drm] Initialized drm 1.1.0 20060810 [ 1.679934] OMAP DSS rev 6.1 [ 1.683696] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.692181] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 1.701139] tpd12s015 encoder: GPIO lookup for consumer (null) [ 1.701149] tpd12s015 encoder: using device tree for GPIO lookup [ 1.701180] of_get_named_gpiod_flags: parsed 'gpios' property of node '/encoder[0]' - status (0) [ 1.701195] tpd12s015 encoder: GPIO lookup for consumer (null) [ 1.701203] tpd12s015 encoder: using device tree for GPIO lookup [ 1.701240] of_get_named_gpiod_flags: parsed 'gpios' property of node '/encoder[1]' - status (0) [ 1.701253] tpd12s015 encoder: GPIO lookup for consumer (null) [ 1.701260] tpd12s015 encoder: using device tree for GPIO lookup [ 1.701310] of_get_named_gpiod_flags: parsed 'gpios' property of node '/encoder[2]' - status (0) [ 1.702002] of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/connector[0]' [ 1.702293] panel-dpi display: GPIO lookup for consumer enable [ 1.702303] panel-dpi display: using device tree for GPIO lookup [ 1.702331] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/display[0]' - status (0) [ 1.708481] loop: module loaded [ 1.714506] libphy: Fixed MDIO Bus: probed [ 1.768308] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.774433] davinci_mdio 48485000.mdio: detected phy mask fffffff9 [ 1.784964] libphy: 48485000.mdio: probed [ 1.789037] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 1.798772] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY [ 1.809159] cpsw 48484000.ethernet: Detected MACID = a0:f6:fd:bd:48:ae [ 1.815807] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 1.822796] cpsw 48484000.ethernet: cpsw: Detected MACID = a0:f6:fd:bd:48:af [ 1.831354] mousedev: PS/2 mouse device common for all mice [ 1.837401] i2c /dev entries driver [ 1.842453] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_fan[0]' - status (0) [ 1.843695] gpio-fan gpio_fan: GPIO fan initialized [ 1.849639] tmp102 0-0048: initialized [ 1.856334] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.856344] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.856375] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 1.856411] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.861097] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 1.861106] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.861116] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.861125] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.861134] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.861142] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 1.861480] vdd_3v3: supplied by regen1 [ 1.908513] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 1.908524] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 1.908534] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 1.908544] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 1.908552] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 1.908560] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 1.908571] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 1.908579] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 1.908588] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 1.908597] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 1.908604] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 1.908612] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 1.908780] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 1.915164] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 1.978567] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer cd [ 1.978577] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 1.978588] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480ad000[0]' [ 1.978597] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480ad000[0]' [ 1.978604] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 1.978613] omap_hsmmc 480ad000.mmc: lookup for GPIO cd failed [ 1.978623] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 1.978631] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 1.978639] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 1.978648] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 1.978655] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 1.978662] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.018757] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@0[0]' - status (0) [ 2.018887] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@1[0]' - status (0) [ 2.019008] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@2[0]' - status (0) [ 2.019137] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@3[0]' - status (0) [ 2.019633] ledtrig-cpu: registered to indicate activity on CPUs [ 2.030814] NET: Registered protocol family 10 [ 2.046127] sit: IPv6 over IPv4 tunneling driver [ 2.051432] NET: Registered protocol family 17 [ 2.056115] Key type dns_resolver registered [ 2.060568] omap_voltage_late_init: Voltage driver support not added [ 2.067456] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.073682] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.080388] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.086598] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.094780] Power Management for TI OMAP4+ devices. [ 2.099894] Registering SWP/SWPB emulation handler [ 2.106730] dmm 4e000000.dmm: initialized all PAT entries [ 2.131571] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.138213] [drm] No driver support for vblank timestamp query. [ 2.146005] [drm] Enabling DMM ywrap scrolling [ 2.165107] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.167548] mmc0: new high speed SDHC card at address aaaa [ 2.177876] mmcblk0: mmc0:aaaa SE16G 14.8 GiB [ 2.178690] mmcblk0: p1 p2 [ 2.190305] Console: switching to colour frame buffer device 100x30 [ 2.219273] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 2.222853] mmc1: MAN_BKOPS_EN bit is not set [ 2.231425] mmc1: new DDR MMC card at address 0001 [ 2.236510] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.241214] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.247282] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.253816] mmcblk1: p1 p2 p3 [ 2.258757] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 2.266799] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/USER1[0]' - status (0) [ 2.266824] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/USER2[0]' - status (0) [ 2.266846] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/USER3[0]' - status (0) [ 2.266867] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/USER4[0]' - status (0) [ 2.266887] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/USER5[0]' - status (0) [ 2.267488] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.274422] hctosys: unable to open rtc device (rtc0) [ 2.287778] aic_dvdd_fixed: disabling [ 2.291473] vmmcwl_fixed: disabling [ 2.295137] ldousb: disabling [ 2.298533] ALSA device list: [ 2.301509] No soundcards found. [ 2.793225] EXT4-fs (mmcblk0p2): recovery complete [ 2.799374] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.807526] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.815545] devtmpfs: mounted [ 2.818715] Freeing unused kernel memory: 336K (c08e4000 - c0938000) [ 2.825157] This architecture does not have kernel memory protection. [ 3.036910] systemd[1]: System time before build time, advancing clock. [ 3.076376] random: systemd: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 3.089114] random: systemd: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 3.100799] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.119301] systemd[1]: Detected architecture arm. [ 3.139232] systemd[1]: Set hostname to <am57xx-evm>. [ 3.215100] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 27 bits of entropy available) [ 3.236750] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 28 bits of entropy available) [ 3.247008] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 28 bits of entropy available) [ 3.254138] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 28 bits of entropy available) [ 3.256295] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 28 bits of entropy available) [ 3.344177] random: systemd: uninitialized urandom read (16 bytes read, 32 bits of entropy available) [ 3.353703] random: systemd: uninitialized urandom read (16 bytes read, 32 bits of entropy available) [ 3.363581] random: systemd: uninitialized urandom read (16 bytes read, 32 bits of entropy available) [ 3.759742] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 3.767532] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 3.775339] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 3.782807] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 3.792288] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ 3.830812] systemd[1]: Listening on Syslog Socket. [ 3.858679] systemd[1]: Listening on Network Service Netlink Socket. [ 3.888556] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.918448] systemd[1]: Reached target Swap. [ 3.938490] systemd[1]: Listening on udev Kernel Socket. [ 3.969769] systemd[1]: Created slice System Slice. [ 3.999072] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.029022] systemd[1]: Created slice system-getty.slice. [ 4.058594] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.088546] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.128965] systemd[1]: Listening on Journal Socket. [ 4.198712] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 4.243022] systemd[1]: Starting Load Kernel Modules... [ 4.256661] systemd[1]: Starting Setup Virtual Console... [ 4.268783] CMEMK module: reference Linux version 4.4.41 [ 4.275410] allocated heap buffer 0x40500000 of size 0x100000 [ 4.277334] systemd[1]: Starting Journal Service... [ 4.286372] cmemk initialized [ 4.299251] cryptodev: driver 1.8 loaded. [ 4.310858] systemd[1]: Mounting Debug File System... [ 4.341341] systemd[1]: Mounting Temporary Directory... [ 4.368668] systemd[1]: Reached target Remote File Systems. [ 4.398733] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.428504] systemd[1]: Reached target Paths. [ 4.448616] systemd[1]: Listening on udev Control Socket. [ 4.508543] systemd[1]: Mounting POSIX Message Queue File System... [ 4.539367] systemd[1]: Created slice User and Session Slice. [ 4.558505] systemd[1]: Reached target Slices. [ 4.608662] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.622645] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.637376] systemd[1]: Mounted Debug File System. [ 4.668632] systemd[1]: Mounted POSIX Message Queue File System. [ 4.698498] systemd[1]: Mounted Temporary Directory. [ 4.720162] systemd[1]: Started Journal Service. [ 5.379654] systemd-journald[119]: Received request to flush runtime journal from PID 1 [ 5.762065] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 5.790956] remoteproc0: 58820000.ipu is available [ 5.798474] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 5.807485] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.840359] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 5.856914] remoteproc1: 55020000.ipu is available [ 5.871801] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 5.887590] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.917282] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 5.934201] remoteproc2: 40800000.dsp is available [ 5.944536] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 5.953598] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.984682] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 5.993454] remoteproc3: 41000000.dsp is available [ 6.011780] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 6.027177] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.140196] rtc-ds1307 2-006f: read: 87 25 01 2d 30 03 17 [ 6.140211] rtc-ds1307 2-006f: read secs=7, mins=25, hours=1, mday=30, mon=2, year=117, wday=4 [ 6.140992] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 6.148172] rtc-ds1307 2-006f: read: 87 25 01 2d 30 03 17 [ 6.148182] rtc-ds1307 2-006f: read secs=7, mins=25, hours=1, mday=30, mon=2, year=117, wday=4 [ 6.149592] rtc-ds1307 2-006f: mcp794xx_read_alarm, sec=0 min=0 hour=0 wday=0 mday=1 mon=0 enabled=0 polarity=0 irq=0 match=0 [ 6.149915] rtc-ds1307 2-006f: read: 87 25 01 2d 30 03 17 [ 6.149925] rtc-ds1307 2-006f: read secs=7, mins=25, hours=1, mday=30, mon=2, year=117, wday=4 [ 6.149933] rtc rtc0: alarm rollover: year [ 6.150224] rtc-ds1307 2-006f: read: 87 25 01 2d 30 03 17 [ 6.150234] rtc-ds1307 2-006f: read secs=7, mins=25, hours=1, mday=30, mon=2, year=117, wday=4 [ 6.150384] rtc rtc0: mcp7941x: dev (254:0) [ 6.150398] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 6.170503] rtc-ds1307 2-006f: got IRQ 470 [ 6.170619] rtc-ds1307 2-006f: 64 bytes nvram [ 6.176946] alg: skcipher: setkey failed on test 5 for ecb-des-omap: flags=100 [ 6.189135] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 6.197612] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 6.223506] mt9t11x 4-003c: input-clock-freq: 32000000 [ 6.229521] mt9t11x 4-003c: pixel-clock-freq: 96000000 [ 6.234687] mt9t11x 4-003c: GPIO lookup for consumer reset [ 6.234696] mt9t11x 4-003c: using device tree for GPIO lookup [ 6.234765] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ocp/i2c@4807c000/mt9t11x@3C[0]' - status (0) [ 6.234807] mt9t11x 4-003c: GPIO lookup for consumer powerdown [ 6.234815] mt9t11x 4-003c: using device tree for GPIO lookup [ 6.234834] of_get_named_gpiod_flags: parsed 'powerdown-gpios' property of node '/ocp/i2c@4807c000/mt9t11x@3C[0]' - status (0) [ 6.234845] mt9t11x 4-003c: GPIO lookup for consumer oscen [ 6.234851] mt9t11x 4-003c: using device tree for GPIO lookup [ 6.234869] of_get_named_gpiod_flags: parsed 'oscen-gpios' property of node '/ocp/i2c@4807c000/mt9t11x@3C[0]' - status (0) [ 6.234879] mt9t11x 4-003c: GPIO lookup for consumer bufen [ 6.234884] mt9t11x 4-003c: using device tree for GPIO lookup [ 6.234901] of_get_named_gpiod_flags: parsed 'bufen-gpios' property of node '/ocp/i2c@4807c000/mt9t11x@3C[0]' - status (0) [ 6.234911] mt9t11x 4-003c: GPIO lookup for consumer camen [ 6.234917] mt9t11x 4-003c: using device tree for GPIO lookup [ 6.234935] of_get_named_gpiod_flags: parsed 'camen-gpios' property of node '/ocp/i2c@4807c000/mt9t11x@3C[0]' - status (0) [ 6.281552] mt9t11x 4-003c: Product ID error ffffff87 [ 6.363408] rtc rtc1: 48070000.i2c:tps659: dev (254:1) [ 6.363421] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 6.409276] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: GPIO lookup for consumer id [ 6.409288] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: using device tree for GPIO lookup [ 6.409296] of_get_named_gpiod_flags: can't parse 'id-gpios' property of node '/ocp/i2c@48070000/tps659038@58/tps659038_usb[0]' [ 6.409303] of_get_named_gpiod_flags: can't parse 'id-gpio' property of node '/ocp/i2c@48070000/tps659038@58/tps659038_usb[0]' [ 6.409309] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: using lookup tables for GPIO lookup [ 6.409316] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: lookup for GPIO id failed [ 6.409323] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: GPIO lookup for consumer vbus [ 6.409329] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: using device tree for GPIO lookup [ 6.409335] of_get_named_gpiod_flags: can't parse 'vbus-gpios' property of node '/ocp/i2c@48070000/tps659038@58/tps659038_usb[0]' [ 6.409372] of_get_named_gpiod_flags: parsed 'vbus-gpio' property of node '/ocp/i2c@48070000/tps659038@58/tps659038_usb[0]' - status (0) [ 6.458940] remoteproc1: registered virtio0 (type 7) [ 6.569109] of_get_named_gpiod_flags: can't parse 'gpio-reset' property of node '/ocp/i2c@48070000/tlv320aic3104@18[0]' [ 6.569248] aic_dvdd_fixed: supplied by vdd_3v3 [ 6.593780] rtc rtc2: 48838000.rtc: dev (254:2) [ 6.593792] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc2 [ 6.629192] pixcir_ts 4-005c: GPIO lookup for consumer attb [ 6.629203] pixcir_ts 4-005c: using device tree for GPIO lookup [ 6.629212] of_get_named_gpiod_flags: can't parse 'attb-gpios' property of node '/ocp/i2c@4807c000/pixcir_ts@5c[0]' [ 6.629231] of_get_named_gpiod_flags: parsed 'attb-gpio' property of node '/ocp/i2c@4807c000/pixcir_ts@5c[0]' - status (0) [ 6.629243] pixcir_ts 4-005c: GPIO lookup for consumer reset [ 6.629250] pixcir_ts 4-005c: using device tree for GPIO lookup [ 6.629256] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/i2c@4807c000/pixcir_ts@5c[0]' [ 6.629273] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp/i2c@4807c000/pixcir_ts@5c[0]' - status (0) [ 6.735605] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 6.742972] input: pixcir_tangoc as /devices/platform/44000000.ocp/4807c000.i2c/i2c-4/4-005c/input/input1 [ 6.973703] remoteproc0: registered virtio1 (type 7) [ 7.022851] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 7.462168] SCSI subsystem initialized [ 7.578241] libata version 3.00 loaded. [ 7.592928] rtc-ds1307 2-006f: write secs=53, mins=56, hours=0, mday=30, mon=2, year=117, wday=4 [ 7.592938] rtc-ds1307 2-006f: write: d3 56 00 0d 30 03 17 [ 7.593818] rtc-ds1307 2-006f: read: d3 56 00 2d 30 03 17 [ 7.593830] rtc-ds1307 2-006f: read secs=53, mins=56, hours=0, mday=30, mon=2, year=117, wday=4 [ 7.661514] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 7.669519] ti-pruss 4b200000.pruss: creating PRU cores and other child platform devices [ 7.682599] irq: no irq domain found for /ocp/pruss@4b200000/intc@4b220000 ! [ 7.691610] irq: no irq domain found for /ocp/pruss@4b200000/intc@4b220000 ! [ 7.700136] ti-pruss 4b280000.pruss: creating PRU cores and other child platform devices [ 7.711228] irq: no irq domain found for /ocp/pruss@4b280000/intc@4b2a0000 ! [ 7.725181] irq: no irq domain found for /ocp/pruss@4b280000/intc@4b2a0000 ! [ 7.737033] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 7.743453] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 7.797024] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 7.803834] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 7.815735] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 7.825439] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 7.845607] scsi host0: ahci [ 7.849003] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 346 [ 7.888586] vpe 489d0000.vpe: Device registered as /dev/video0 [ 8.008812] vip 48990000.vip: loading firmware vpdma-1b8.bin [ 8.028323] vip 48990000.vip: VPDMA firmware loaded [ 8.126911] remoteproc4: 4b234000.pru0 is available [ 8.133920] remoteproc4: Note: remoteproc is still under development and considered experimental. [ 8.154553] remoteproc4: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 8.198395] ata1: SATA link down (SStatus 0 SControl 300) [ 8.321764] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 8.341783] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 8.590007] remoteproc2: registered virtio2 (type 7) [ 8.639107] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound@0[0]' [ 8.639118] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound@0[0]' [ 8.640079] asoc-simple-card sound@0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 8.750378] remoteproc3: registered virtio3 (type 7) [ 8.776529] remoteproc4: registered virtio4 (type 7) [ 8.781781] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss@4b200000/pru0@4b234000 probed successfully [ 8.793363] remoteproc5: 4b238000.pru1 is available [ 8.799096] remoteproc5: Note: remoteproc is still under development and considered experimental. [ 8.808900] remoteproc5: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 8.868288] remoteproc5: registered virtio5 (type 7) [ 8.873407] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss@4b200000/pru1@4b238000 probed successfully [ 8.885150] remoteproc6: 4b2b4000.pru0 is available [ 8.890728] remoteproc6: Note: remoteproc is still under development and considered experimental. [ 8.900777] remoteproc6: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 9.091167] remoteproc6: registered virtio6 (type 7) [ 9.102544] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss@4b280000/pru0@4b2b4000 probed successfully [ 9.113872] remoteproc7: 4b2b8000.pru1 is available [ 9.154125] remoteproc7: Note: remoteproc is still under development and considered experimental. [ 9.198666] remoteproc7: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 9.212677] random: nonblocking pool is initialized [ 9.246059] remoteproc7: registered virtio7 (type 7) [ 9.251629] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss@4b280000/pru1@4b2b8000 probed successfully [ 9.266916] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9.281312] FAT-fs (mmcblk1p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9.300051] FAT-fs (mmcblk1p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9.347621] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9.427150] Bluetooth: Core ver 2.21 [ 9.444174] NET: Registered protocol family 31 [ 9.470650] Bluetooth: HCI device and connection manager initialized [ 9.478387] NET: Registered protocol family 15 [ 9.497232] net eth1: initializing cpsw version 1.15 (0) [ 9.520189] Bluetooth: HCI socket layer initialized [ 9.554466] net eth0: initialized cpsw ale version 1.4 [ 9.566818] Bluetooth: L2CAP socket layer initialized [ 9.579400] net eth0: ALE Table size 1024 [ 9.600803] Bluetooth: SCO socket layer initialized [ 9.683695] net eth1: phy found : id is : 0x221622 [ 9.729179] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.729959] Initializing XFRM netlink socket [ 9.768018] net eth0: initializing cpsw version 1.15 (0) [ 9.885774] net eth0: phy found : id is : 0x221622 [ 9.922328] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.601710] remoteproc1: powering up 55020000.ipu [ 10.647804] remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743116 [ 10.720399] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 10.938222] remoteproc1: remote processor 55020000.ipu is now up [ 10.962889] virtio_rpmsg_bus virtio0: rpmsg host is online [ 10.968441] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 10.977333] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x66 [ 10.999358] remoteproc0: powering up 58820000.ipu [ 11.030080] remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4890352 [ 11.037072] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 11.062488] remoteproc0: remote processor 58820000.ipu is now up [ 11.088735] virtio_rpmsg_bus virtio1: rpmsg host is online [ 11.094282] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x32 [ 11.106080] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x33 [ 11.119705] remoteproc2: powering up 40800000.dsp [ 11.140150] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c [ 11.168317] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 11.196101] remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 21914156 [ 11.235110] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 11.241007] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 11.246932] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 11.303778] remoteproc2: remote processor 40800000.dsp is now up [ 11.331881] virtio_rpmsg_bus virtio2: rpmsg host is online [ 11.337420] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d [ 11.359812] remoteproc3: powering up 41000000.dsp [ 11.407590] remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 21914156 [ 11.445327] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 11.451225] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 11.457151] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 11.516882] remoteproc3: remote processor 41000000.dsp is now up [ 11.549815] virtio_rpmsg_bus virtio3: rpmsg host is online [ 11.555355] virtio_rpmsg_bus virtio3: creating channel rpmsg-proto addr 0x3d [ 11.569042] remoteproc4: powering up 4b234000.pru0 [ 11.579175] remoteproc4: Booting fw image am57xx-pru1_0-fw, size 75952 [ 11.593766] ti-pruss 4b200000.pruss: configured system_events = 0x0000000000030000 intr_channels = 0x00000005 host_intr = 0x00000005 [ 11.629417] remoteproc4: remote processor 4b234000.pru0 is now up [ 11.687438] virtio_rpmsg_bus virtio4: rpmsg host is online [ 11.687468] virtio_rpmsg_bus virtio4: creating channel rpmsg-pru addr 0x1e [ 11.701559] remoteproc5: powering up 4b238000.pru1 [ 11.706613] remoteproc5: Booting fw image am57xx-pru1_1-fw, size 75952 [ 11.735595] ti-pruss 4b200000.pruss: configured system_events = 0x00000000000c0000 intr_channels = 0x0000000a host_intr = 0x0000000a [ 11.752344] remoteproc5: remote processor 4b238000.pru1 is now up [ 11.774151] virtio_rpmsg_bus virtio5: rpmsg host is online [ 11.774181] virtio_rpmsg_bus virtio5: creating channel rpmsg-pru addr 0x1f [ 11.787164] remoteproc6: powering up 4b2b4000.pru0 [ 11.822437] remoteproc6: Booting fw image am57xx-pru2_0-fw, size 75952 [ 11.839256] ti-pruss 4b280000.pruss: configured system_events = 0x0000000000030000 intr_channels = 0x00000005 host_intr = 0x00000005 [ 11.874535] remoteproc6: remote processor 4b2b4000.pru0 is now up [ 11.887908] usbcore: registered new interface driver usbfs [ 11.895348] virtio_rpmsg_bus virtio6: rpmsg host is online [ 11.895377] virtio_rpmsg_bus virtio6: creating channel rpmsg-pru addr 0x20 [ 11.908376] usbcore: registered new interface driver hub [ 11.913827] remoteproc7: powering up 4b2b8000.pru1 [ 11.916163] usbcore: registered new device driver usb [ 11.927646] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 11.929986] remoteproc7: Booting fw image am57xx-pru2_1-fw, size 75952 [ 11.930114] ti-pruss 4b280000.pruss: configured system_events = 0x00000000000c0000 intr_channels = 0x0000000a host_intr = 0x0000000a [ 11.953700] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 11.956210] remoteproc7: remote processor 4b2b8000.pru1 is now up [ 11.964505] virtio_rpmsg_bus virtio7: rpmsg host is online [ 11.967690] virtio_rpmsg_bus virtio7: creating channel rpmsg-pru addr 0x21 [ 11.990925] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 11.995136] rpmsg_pru rpmsg8: new rpmsg_pru device: /dev/rpmsg_pru30 [ 11.995300] rpmsg_pru rpmsg9: new rpmsg_pru device: /dev/rpmsg_pru31 [ 11.995455] rpmsg_pru rpmsg10: new rpmsg_pru device: /dev/rpmsg_pru32 [ 11.995603] rpmsg_pru rpmsg11: new rpmsg_pru device: /dev/rpmsg_pru33 [ 12.071881] rpmsg_rpc rpmsg0: probing service dce-callback with src 1024 dst 101 [ 12.076181] xhci-hcd xhci-hcd.1.auto: irq 473, io mem 0x48890000 [ 12.087952] NET: Registered protocol family 41 [ 12.098521] hub 1-0:1.0: USB hub found [ 12.099271] hub 1-0:1.0: 1 port detected [ 12.099579] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 12.099591] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 12.099690] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 12.100591] hub 2-0:1.0: USB hub found [ 12.100620] hub 2-0:1.0: 1 port detected [ 12.185995] rpmsg_rpc rpmsg1: probing service rpmsg-dce with src 1025 dst 102 [ 12.186423] rpmsg_rpc rpmsg0: published functions = 4 [ 12.201636] rpmsg_rpc rpmsg5: probing service rpc_example_2 with src 1024 dst 101 [ 12.201997] rpmsg_rpc rpmsg1: published functions = 9 [ 12.216255] rpmsg_rpc rpmsg5: published functions = 8 [ 12.268495] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ 12.398396] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 12.405020] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 12.435981] hub 2-1:1.0: USB hub found [ 12.439956] hub 2-1:1.0: 4 ports detected [ 12.580340] hub 1-1:1.0: USB hub found [ 12.590656] hub 1-1:1.0: 4 ports detected [ 22.085734] omap_hwmod: mmu1_dsp1: _wait_target_disable failed [ 22.098740] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 22.111879] omap_hwmod: mmu1_dsp2: _wait_target_disable failed [ 22.124904] omap_hwmod: mmu0_dsp2: _wait_target_disable failed root@am57xx-evm:~#
BR :)
Faiez
I suggest two things - to check if the camera board is mounted properly on the EVM. Second, to migrate to latest PLSDK. Older driver had race condition related bug because of which the camera module wasn't getting detected always.
