RTOS/AM4376: SORTE example questions

WTMEC_Will Hsu

Expert 2620 points

Part Number: AM4376

Tool/software: TI-RTOS

Hi TI Team
How to load PRUSS SORTE example on AM437x-IDK using CCS?
How to creat PRUSS SORTE project for CCS?

processors.wiki.ti.com/.../Processor_SDK_RTOS_PRUSS_SORTE

over 5 years ago

0 Biser Gatchev-XID over 5 years ago

TI__Guru**** 393215 points

The RTOS team have been notified. They will respond here.

0 Garrett Ding over 5 years ago in reply to Biser Gatchev-XID

TI__Mastermind 43296 points

Hi,

Please refer to these threads about converting makefile based example to CCS project.

e2e.ti.com/.../216445
e2e.ti.com/.../443484

Regards,
Garrett

0 WTMEC_Will Hsu over 5 years ago in reply to Garrett Ding

Expert 2620 points

Hi Garrett
Thanks for your reply.
How to load PRUSS SORTE example on AM437x-IDK using CCS?

0 Garrett Ding over 5 years ago in reply to WTMEC_Will Hsu

TI__Mastermind 43296 points

Hi,

You can use on board JTAG or external 20 pin JTAG connector to load the PRUSS SORTE example on AM437x-IDK.

The AM437x Industrial EVM supports embedded XDS100V2 USB Emulation through the MicroUSB AB connector. It also has an optional 20 pin TI CJTAG connector to support the Emulation, see processors.wiki.ti.com/.../AM437x_IDK_EVM_HW_User_Guide

Regards,
Garrett

0 WTMEC_Will Hsu over 5 years ago in reply to Garrett Ding

Expert 2620 points

Hi Garrett

Thanks a lot, I can connect to AM437x-IDK through XDS100V2.

How to compile SORTE project?

0 Garrett Ding over 5 years ago in reply to WTMEC_Will Hsu

TI__Mastermind 43296 points

Hi Will,

The SORT project build process is described in the wiki -

processors.wiki.ti.com/.../Processor_SDK_RTOS_PRUSS_SORTE

Regards,
Garrett

Processors

Processors forum

RTOS/AM4376: SORTE example questions