Sitara™ ARM®

Browse by Tags

Sitara™ ARM®

Welcome to the Sitara™ ARM® Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".

Sign In to Post
Tags
You have subscribed to this tag. To view or manage your tag subscriptions, click here.   Close
You have unsubscribed from this tag. To view or manage your tag subscriptions, click here.   Close
You are currently viewing:
ICE
Related Posts

  • Forum Post: EtherCAT ESC Support for LRW for Process Data

    Jonathan Marrs
    Hi, I have the AM335x ICE with version 01.00.00.02 of the AM335x SYS/BIOS Industrial SDK. I am running the example EtherCAT application (ecat_appl). I noticed in the SDK release notes that "LRW for process data" is not supported by the EtherCAT firmware (the Ethercat Slave Controller /...
    on May 15, 2012

  • Forum Post: Re: AM335x MII_RT, IEP, MDIO, EDIO

    Maneesh
    - We connect a AD converter over serial interface on the IDK board. The ADC is in a C2000 class device that is connected over SPI. - It is possible to still use 16-bit NOR Flash and DPRAM when GPMC is used in Address/Data multiple mode. We are about to release schematics of AM3359 ICE board on ti...
    on Jan 17, 2012

  • Forum Post: Re: AM3359 ICE Board (Pin Mux Problem)

    Frank Walzer
    Good catch! But be assured that the ICE schematics are ok in that sense. We have tested this with our EtherCAT slave implementation. The explanation why will be a bit lengthy... sorry. Actually there is an additional mux internal to the PRUSS. That allows to use the above seen pins as MII0 RXDn...
    on Feb 15, 2012

  • Forum Post: Re: AM3359 ICE Board (Pin Mux Problem)

    benny_
    Hello Frank, We are designing a platform with ethercat, muxed GPMC and some other peripherasl: SPIs, USBs, CAN, uarts and so on. I am really interested on the posibility that you pointed out, of using different signals of the PRU instead of the'normal' chip level pin-mux assignment. I would...
    on Feb 23, 2012

  • Forum Post: Unsupported EtherCAT Features

    Christian Herget
    Hello, the release notes for the Industrial Automation SDK contains a list called "What Is Not Supported". What about the unsupported EtherCAT features, is there any plan to include these in future releases? I'm asking especially about the Distributed Clocks feature, because a...
    on Mar 13, 2012

  • Forum Post: Embedded World 2012 - Hands-on Workshop: ARM Cortex-A for Industrial real time communication!

    Ben Lewis
    At Embedded World 2012 Jens Stapelfeldt and Frank Walzer from TI conducted a workshop on the "ARM Cortex-A for Industrial real time communication". http://www.arm.com/about/events/embedded-world-2012.php Many for the presentations were recorded and put on the web here . Unfortunately...
    on Mar 9, 2012

  • Forum Post: Re: 16MBytes of NOR flash on the GPMC interface and both PRU MII interfaces

    Darrin Hansen
    I'm probably just dense, but I'm trying to figure out the GPMC layout on the ICE. From table 7.5 in the TRM, it seems to indicate that for a 16-bit multiplexed device, the next address line to use after the multiplexed version of GPMC_AD[15] would be GPMC_A[17] (or perhaps GPMC_A[16] as applied...
    on Mar 21, 2012

  • Forum Post: Re: ICE EtherCAT example failing to build

    Drew Moore
    I was hoping I could help you, but the best I can tell you is I'm seeing the same problem too... My pathnames are a little different, that's about it. Cheers
    on Mar 24, 2012

  • Forum Post: Re: TMDXICE3359

    Drew Moore
    I updated SYS/BIOS and XDC tools from this page.. http://www.ti.com/tool/sysbios I got to that page from http://www.ti.com/tool/sysbiossdk-ind-sitara and got to that page from http://www.ti.com/tool/tmdxice3359 I installed them in the code composer directory and when code composer restarted...
    on Mar 27, 2012

  • Forum Post: Re: Problem with flashing ICE AM3359

    Michael Rinker
    I´m not able to select a .bin- file. The SPI_Flashing_Tool.out does not run. When I have loaded it an do a restart, the error occurs.
    on Apr 5, 2012

  • Forum Post: About connecting between AM3359 and TLK110 for EtherCAT.

    RY9983
    Hello, I am referencing schematic which connecting between AM3359 and TLK110 on ICE and IDK. AM335x datasheet describes that on ZCZ BALL PRUSS/MII0 Signals are : (SPRS717B P63: Table 2-32. PRU Subsystem/MII0 Signals Description) - pr1_mii0_col [T10] - pr1_mii0_crs [T13, V5] - pr1_mii0_rxd0 [U4] -...
    on Apr 11, 2012

  • Forum Post: TPS65910A1 PMIC for Sitara AM3359 ZCZ

    Jure Zaninovich
    I have designed a board which is for the most part a "clone" of the ICE ( http://www.ti.com/tool/tmdxice3359 ) , with many other devices as required for our application. The problem I am facing now is that the PMIC is not getting out of the "OFF" state. The actual PMIC part...
    on May 1, 2012

  • Forum Post: RE: AM3359 ICE setting clock frequency

    Michael Rinker
    Projects->Properties->CCS General->RTSC I have thinked to do it the same way, but I havent tried it, maybee you can post, if it works with the new frequency and the custom platform.
    on Jun 5, 2012

  • Forum Post: Industrial Communications Engine (ICE) board - problem with Ethercat

    Luca Melandri
    Hi, I've just bought 1 ICE board and I'm trying to follow the instructions to make it work with Twincat. I suppose that the starting demo program (with the board just bought) is the Ethercat example. So I tried to follow the instructions of the Getting Started Guide found in http://processors...
    on Jun 6, 2012

  • Forum Post: RE: Issues with DMTimer for AM335x SYS/BIOS Industrial SDK for ICE

    Jonathan Marrs
    I have tried calling a SYS/BIOS API function for creating a device-specific DMTimer for the AM335x. The issue is that if I configure any registers for DMTimer3 before calling the Timer_create() function, SYS/BIOS hangs/aborts and complains that the timer is not available. So apparently I cannot touch...
    on Jun 12, 2012

  • Forum Post: Issues with DMTimer for AM335x SYS/BIOS Industrial SDK for ICE

    Jonathan Marrs
    Hello, I am using the AM335x ICE with the Industrial SDK 1.0.0.2, with SYS/BIOS 6.33.00.19, on CCS 5.1.0.09000. I am using the example EtherCAT project (ecat_appl). Right now, I am trying to implement a timer that triggers every 250 microseconds. Therefore, I am planning on using DMTimer3 for this...
    on Jun 12, 2012

  • Forum Post: RE: Schema ICE Board for Eagle or Altium Designer V10

    Maneesh
    There are import tools in Altium which should make it possible to import Orcad design files. Here is a guide (http://www.altium.com/files/AltiumDesigner/s08/learningguides/AP0165%20Moving%20to%20Altium%20Designer%20from%20Cadence%20Allegro%20PCB%20Editor.pdf). Thanks, Maneesh
    on Jul 3, 2012

  • Forum Post: EtherCAT LEDs on AM335x ICE

    Jonathan Marrs
    Hello, I am trying to understand the implementation of the EtherCAT LEDs on the AM335x ICE. The ETG.1300 EtherCAT Indicator and Labeling Specification shows that there are four LEDs that are part of the EtherCAT specification: RUN, ERROR, Link, and Activity. In the specification, it states that the...
    on Apr 4, 2012

  • Forum Post: RE: Booting Linux on AM3359 ICE

    Cyril M��ller
    Hi Jury / Alll I'm also trying to get u-boot running on ICE. Currently I have a cross-compiled u-boot (compiled with Sourcery_CodeBench_Lite_for_ARM_GNU_Linux for am335x_evm). Now I'm a bit stuck. Jury, what MLO are do you mean? The MLO from u-boot? If it is the MLO from U-Boot. Where did...
    on Aug 31, 2012

  • Forum Post: AM3359 ICE Board (Pin Mux Problem)

    Pruf
    Dear TI Support Team I have just checked the AM3359 ICE Schematic (Rev. A2) and I have tried to follow the Pin assignment with the Pin Mux Utility (Version 2.2.1.0). Now I have seen the the ICE is using the ZCZ package and connects PRUTH0_RXD1 signal to pin V5. But Pin V5 is not a PR1 MII0 RXD1 pin according...
    on Feb 15, 2012

  • Forum Post: ICE board :ethercat port problem of the in and out port

    wei zhao3
    Hello, I use the ICE board as a slave to connect the master, when the ICE board is at the last of the slaves , the only port that can connected is the "in" port , and when change to connect the "out" port, it can't connected(or scanned by the Twincat). But when use the ICE board...
    on Dec 11, 2012

  • Forum Post: AM3359 ICE RJ45 Magnetics

    Pruf
    Hello, I have a question about the used RJ45 connectors in the AM335x ICE board design. The used type is 5-6605728-8 or 5-6605728-1 from TE. As of the datasheet it uses asymmetrical magnetics for NIC configuration (does not support Auto-MDI/MDIX). Did TI choose this type on purpose or does an other RJ45...
    on Jan 18, 2013

  • Forum Post: Trouble Porting EtherCAT Application to SDK 1.0.0.6 - EtherCAT PDI IRQ/ISR Not Working

    Jonathan Marrs
    Hello, I am having some trouble porting my EtherCAT application, which is based on the example project "ecat_appl", from SDK 1.0.0.5 to SDK 1.0.0.6. The issue appears to be that the EtherCAT PDI IRQ/ISR never happens, even though I try to enter SAFEOP and OP mode via TwinCAT. My application...
    on Feb 5, 2013

  • Forum Post: Running IP on the ICE

    Benjamin St��cker
    Hi, my company is designing a board for embedded measurement device and we are using the ICE-hardware design as reference. Basicly the board should be able to communicate over TCP and a real-time bus (Profibus or Profinet). Perfect would be at the same time! Is there any possibility to run TCP...
    on Feb 21, 2013

  • Forum Post: ICE Board - Power PMAC EtherCAT Master

    taeyun kwak
    Hi, I'm using TI ICE Board to implement EtherCAT Slave Controller a nd Delta tau Power PMAC as EtherCAT Master. Here is a problem that SDO data is not downloaded correctly. For example, when I wrote "0x4444" to 0x607D:1(32bit object), slave receive only lower 8bit (0x44). This problem...
    on May 21, 2013
12

All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI, its suppliers and providers of content reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.

TI Worldwide | Contact Us | my.TI Login | Site Map | Corporate Citizenship | mobile m.ti.com (Mobile Version)

TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.

© Copyright 1995-2013 Texas Instruments Incorporated. All rights reserved.
Trademarks | Privacy Policy | Terms of Use